CVE-2025-70233
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedStack buffer overflow vulnerability in D-Link DIR-513 v1.10 via the curTime parameter to goform/formSetEnableWizard.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · high confidenceStack buffer overflow in D-Link DIR-513 v1.10 router firmware where the curTime parameter in the goform/formSetEnableWizard web interface function is not properly bounds-checked before being copied to a stack buffer, allowing remote attackers to overwrite stack memory and potentially achieve arbitrary code execution.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data= 1.10CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Privileges
- None
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Identify device modelAccess the router web admin interface or check the device label to confirm the model is D-Link DIR-513Affected if The device is a D-Link DIR-513 router
-
Check firmware versionLog into the router web interface and navigate to the Status or System Information page to view the firmware version, or use the command 'cat /proc/version' via telnet/SSH if availableAffected if Firmware version is 1.10
-
Verify web interface is enabledAttempt to access the router login page at http://[router-ip]/ or check if HTTP service is listening on ports 80/443Affected if The web management interface is accessible on the network
-
Check if goform endpoint respondsSend an HTTP POST request to http://[router-ip]/goform/formSetEnableWizard with any parameter and observe if the endpoint is reachableAffected if The /goform/formSetEnableWizard endpoint is accessible and responds
A user is affected if they have a D-Link DIR-513 router running firmware version 1.10 with the web interface accessible on the network.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataThis is an end-of-life device with no vendor patch available; replace with a currently-supported router model or implement network segmentation to isolate the device if continued operation is unavoidable.
- Consultation3.0 h
- Implementation4.0 h
- Testing2.0 h
- Review / QA1.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $2,880.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2025-70233 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2025-70233 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data