CVE-2025-8630
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedKenwood DMX958XR Firmware Update Command Injection Vulnerability. This vulnerability allows physically present attackers to execute arbitrary code on affected installations of Kenwood DMX958XR devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the firmware update process. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-26253.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · moderate confidenceCommand injection vulnerability in Kenwood DMX958XR firmware update process. The device fails to validate user-supplied strings before passing them to system calls, allowing physically present attackers to execute arbitrary commands as root without authentication.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data= 1.0.0005.4600CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Physical
- Complexity
- Low
- Privileges
- None
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
CVSS:3.0/AV:P/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Confirm device model is Kenwood DMX958XRInspect the device physical label or access device system information menu to verify the model number matches DMX958XRAffected if device model is Kenwood DMX958XR
-
Check installed firmware versionAccess device settings or system information panel and locate the firmware version entry. Compare against the affected version 1.0.0005.4600Affected if firmware version is exactly 1.0.0005.4600
-
Verify USB update interface is accessibleInspect the device USB port and determine if external USB storage can be connected for firmware updatesAffected if USB port is exposed and accepts storage devices for update operations
-
Verify SD card update interface is accessibleInspect the device SD card slot and determine if SD storage can be inserted for firmware updatesAffected if SD card slot is exposed and accepts storage devices for update operations
-
Check physical security of update portsExamine physical access controls around USB and SD interfaces - determine if an attacker could physically connect malicious storage without detectionAffected if USB or SD ports are physically accessible to unauthorized personnel
Device is affected if it is a Kenwood DMX958XR running firmware version 1.0.0005.4600 with accessible USB or SD interfaces that support firmware updates.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataApply vendor firmware updates when available. Until then, restrict physical access to device USB/SD update interfaces and monitor for unauthorized physical access attempts.
- Consultation6.0 h
- Implementation8.0 h
- Testing6.0 h
- Review / QA4.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $6,816.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2025-8630 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2025-8630 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data