CVE-2026-42368
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedA privilege escalation vulnerability exists in the Web Interface functionality of GeoVision LPC2011/LPC2211 1.10. A specially crafted HTTP request can lead to execute priviledged operation. An attacker can visit a webpage to trigger this vulnerability.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · moderate confidenceA privilege escalation vulnerability exists in the Web Interface of GeoVision LPC2011/LPC2211 version 1.10. Attackers can send specially crafted HTTP requests to execute privileged operations, likely due to insufficient authorization controls in the web interface that allows low-privileged or unauthenticated users to gain administrative access.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data= 1.10= 1.10CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Privileges
- Low
- User interaction
- None
- Scope
- Changed
- Confidentiality
- High
- Integrity
- High
- Availability
- High
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Identify the exact device modelAccess the device web interface or check device documentation/labels to confirm the model is either LPC2011 or LPC2211Affected if The device model is LPC2011 or LPC2211
-
Check the installed firmware versionLog into the device web interface and navigate to the System or About section to view the firmware version, or use the device's SNMP or diagnostic interface to query the firmware versionAffected if The firmware version is exactly 1.10
-
Verify the web interface is enabledConfirm that the device HTTP/HTTPS web service is running by attempting to access the device IP address in a browser, or check the device network configuration for web service statusAffected if The web interface is accessible and responding to HTTP/HTTPS requests
-
Assess web interface network exposureCheck firewall rules or network configuration to determine if the web interface is exposed to untrusted networks or the public internet, rather than being limited to a trusted management VLANAffected if The web interface is reachable from untrusted network segments or the internet
The device is affected if it is a GeoVision LPC2011 or LPC2211 model running firmware version 1.10 with the web interface enabled and accessible, particularly from untrusted networks.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataIsolate affected devices on a restricted network segment, disable remote web interface access if possible, and contact GeoVision for firmware patches. Implement firewall rules to limit HTTP/HTTPS access to trusted IP addresses only.
- Consultation3.0 h
- Implementation4.0 h
- Testing3.0 h
- Review / QA2.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $3,408.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2026-42368 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2026-42368 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data