dbcve.org
Big Ip Access Policy ManagerApplication · F5

CVE-2026-42924

HIGH · 8.7 CVSS v3.1 Published 2026-05-13
Fix available
A fix is available. Upgrade to after 17.5.1 or later.
See remediation →
93/100
Remediation priority · Urgent
Remotely reachable Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
An authenticated attacker with the Resource Administrator or Administrator role can create SNMP configuration objects through iControl SOAP resulting in privilege escalation.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

This is a privilege escalation vulnerability in F5 BIG-IP and similar products using iControl SOAP. An authenticated attacker with Resource Administrator or Administrator role can create SNMP configuration objects through the iControl SOAP API, which can be leveraged to escalate privileges beyond the attacker's current role permissions.

MitigationRestrict access to iControl SOAP management interfaces via network segmentation and apply vendor patches when available. Review and minimize the number of users granted Resource Administrator or Administrator roles.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Big Ip Access Policy ManagerApplication
Affected:= 21.0.0>= 17.1.0, <= 17.1.3>= 17.5.0, <= 17.5.1>= 16.1.0, <= 16.1.6
Big Ip Advanced Firewall ManagerApplication
Affected:= 21.0.0>= 17.1.0, <= 17.1.3>= 17.5.0, <= 17.5.1>= 16.1.0, <= 16.1.6
Big Ip Advanced Web Application FirewallApplication
Affected:= 21.0.0>= 17.1.0, <= 17.1.3>= 17.5.0, <= 17.5.1>= 16.1.0, <= 16.1.6
Big Ip AnalyticsApplication
Affected:= 21.0.0>= 17.1.0, <= 17.1.3>= 17.5.0, <= 17.5.1>= 16.1.0, <= 16.1.6
Big Ip Application Acceleration ManagerApplication
Affected:= 21.0.0>= 17.1.0, <= 17.1.3>= 17.5.0, <= 17.5.1>= 16.1.0, <= 16.1.6
Big Ip Application Security ManagerApplication
Affected:= 21.0.0>= 17.1.0, <= 17.1.3>= 17.5.0, <= 17.5.1>= 16.1.0, <= 16.1.6
Big Ip Application Visibility And ReportingApplication
Affected:= 21.0.0>= 17.1.0, <= 17.1.3>= 17.5.0, <= 17.5.1>= 16.1.0, <= 16.1.6
Big Ip Automation ToolchainApplication
Affected:= 21.0.0>= 17.1.0, <= 17.1.3>= 17.5.0, <= 17.5.1>= 16.1.0, <= 16.1.6

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
High
User interaction
None
Scope
Changed
Confidentiality
High
Integrity
High
Availability
None

CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:N

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify installed BIG-IP version
    Run 'tmsh show sys version' or check the BIG-IP Configuration utility under System > About. Alternatively, query the iControl REST endpoint: GET /mgmt/tmui/sys/version/
    Affected if The installed version matches = 21.0.0; >= 17.1.0 through <= 17.1.3; >= 17.5.0 through <= 17.5.1; or >= 16.1.0 through <= 16.1.6
  2. Verify iControl SOAP service is exposed
    Check if the iControl SOAP endpoint is accessible on port 443 or 8443. Inspect network configuration via 'tmsh list sys httpd' and look for 'auth-iControl' settings. Review management interface accessibility.
    Affected if iControl SOAP is enabled and reachable from a network where untrusted users can access it
  3. Identify users with Resource Administrator or Administrator roles
    Query user accounts via iControl SOAP or REST: GET /mgmt/tmui/sys/user or run 'tmsh list sys auth user' to enumerate accounts and their assigned roles.
    Affected if There exist user accounts with Resource Administrator or Administrator role permissions in the system
  4. Check SNMP configuration access via iControl SOAP
    Review SNMP configuration objects created through iControl SOAP API. Run 'tmsh list sys snmp' or query the iControl SOAP interface for SNMP-related method calls.
    Affected if SNMP configuration can be created or modified through iControl SOAP API by authenticated users with Resource Administrator role

You are affected if your BIG-IP version falls within the affected ranges AND iControl SOAP is accessible AND an authenticated user with Resource Administrator or Administrator role can create SNMP configuration objects.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Upgrade available Upgrade to a release after 17.5.1
Interim mitigation

Restrict access to iControl SOAP management interfaces via network segmentation and apply vendor patches when available. Review and minimize the number of users granted Resource Administrator or Administrator roles.

Fix this in Big Ip Access Policy Manager Scoped from the published advisory
  • Consultation4.0 h
  • Implementation2.0 h
  • Testing3.0 h
  • Review / QA2.0 h
11.0 hours of engineering $1,970
Get the upgrade done

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $3,152.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2026-42924 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

Get it on GitHub Scan in the browser

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2026-42924 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data