dbcve.org
macOSOperating system · Apple

CVE-2000-0041

MEDIUM · 5.0 CVSS v2.0 Published 1999-12-28
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
59/100
Remediation priority · Elevated
Remotely reachable No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Macintosh systems generate large ICMP datagrams in response to malformed datagrams, allowing them to be used as amplifiers in a flood attack.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

Macintosh systems from this era generate large ICMP error response datagrams when receiving malformed ICMP packets, enabling them to be weaponized as amplification reflectors in denial-of-service attacks.

MitigationFilter or rate-limit incoming malformed ICMP traffic at the network perimeter, or disable ICMP responses on affected systems if not required.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
macOSOperating system
Affected:= 9.0

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Authentication
None
Confidentiality
None
Integrity
None
Availability
Partial

AV:N/AC:L/Au:N/C:N/I:N/A:P

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify the operating system version
    Determine the exact macOS version installed on the system. On classic Mac OS 9.0 systems, this is typically visible in the System Installer or can be checked via System Profiler / About This Mac
    Affected if The system is running macOS version 9.0 (exactly) - only this specific version is affected
  2. Verify ICMP network stack is accessible
    Confirm the system has an active IP stack and can process incoming network packets. On macOS 9.0, check if TCP/IP control panel is configured and enabled
    Affected if The system has ICMP processing enabled and is reachable on the network - the vulnerability requires the ICMP stack to be active

A system is affected only if it runs exactly macOS 9.0 AND has ICMP networking functionality enabled and accessible from the network.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Filter or rate-limit incoming malformed ICMP traffic at the network perimeter, or disable ICMP responses on affected systems if not required.

Fix this in macOS Scoped from the published advisory
  • Consultation1.0 h
  • Implementation2.0 h
  • Testing1.0 h
  • Review / QA1.0 h
5.0 hours of engineering $890
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $1,424.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2000-0041 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

Get it on GitHub Scan in the browser

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2000-0041 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data