FinesseApplication · Cisco

CVE-2013-3455

MEDIUM · 5.0 CVSS v2.0 Published 2013-08-12
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
59/100
Remediation priority · Elevated
Remotely reachable No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Cisco Finesse allows remote attackers to obtain sensitive information by sniffing the network for HTTP query data, aka Bug ID CSCug16732.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

Cisco Finesse transmits sensitive information in HTTP query parameters without encryption, allowing remote attackers on the same network segment to intercept this data via packet sniffing.

MitigationEnable HTTPS/SSL encryption for all Cisco Finesse web communications and ensure TLS is properly configured with valid certificates.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
FinesseApplication
Affected:all versions

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Authentication
None
Confidentiality
Partial
Integrity
None
Availability
None

AV:N/AC:L/Au:N/C:P/I:N/A:N

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Verify Cisco Finesse is installed
    Check for Cisco Finesse processes or services running on the system, or look for Finesse installation directories
    Affected if Cisco Finesse software is present and running on the system
  2. Check if HTTP is enabled for Finesse web interface
    Examine the Finesse configuration files or inspect which network ports the Finesse application is listening on. HTTP typically uses port 80.
    Affected if The Finesse web interface is accessible over HTTP (port 80) without SSL encryption
  3. Verify SSL/TLS configuration status
    Review the Finesse SSL/TLS settings in the administration console or configuration files, and check if HTTPS (port 443) is enabled and properly configured
    Affected if HTTPS/SSL is disabled, not configured, or the Finesse server is not binding to secure ports
  4. Confirm sensitive data in query parameters
    Use a network packet capture tool on the same network segment while accessing the Finesse web interface to observe if sensitive information such as credentials or session tokens appear as plain text in URL query parameters
    Affected if Sensitive data is transmitted in clear text via HTTP query parameters that can be captured by packet sniffing

A user is affected if Cisco Finesse is installed and configured to allow unencrypted HTTP access, enabling sensitive data in query parameters to be intercepted by network observers.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Enable HTTPS/SSL encryption for all Cisco Finesse web communications and ensure TLS is properly configured with valid certificates.

Fix this in Finesse Scoped from the published advisory
  • Consultation2.0 h
  • Implementation4.0 h
  • Testing2.0 h
  • Review / QA1.0 h
9.0 hours of engineering $1,600
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $2,560.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2013-3455 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2013-3455 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data