M4300 28g FirmwareOperating system · Netgear

CVE-2017-18834

MEDIUM · 6.1 CVSS v3.1 Published 2020-04-20
Fix available
A fix is available. Upgrade to 12.0.2.15 or later.
See remediation →
68/100
Remediation priority · Elevated
Remotely reachable No privileges

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Certain NETGEAR devices are affected by reflected XSS. This affects M4300-28G before 12.0.2.15, M4300-52G before 12.0.2.15, M4300-28G-POE+ before 12.0.2.15, M4300-52G-POE+ before 12.0.2.15, M4300-8X8F before 12.0.2.15, M4300-12X12F before 12.0.2.15, M4300-24X24F before 12.0.2.15, M4300-24X before 12.0.2.15, M4300-48X before 12.0.2.15, and M4200 before 12.0.2.15.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · high confidence

Reflected cross-site scripting (XSS) vulnerability in NETGEAR M4300 series switches and M4200. The vulnerability allows remote attackers to inject malicious JavaScript code through unsanitized input parameters that get reflected back in the web interface response.

MitigationUpgrade NETGEAR device firmware to version 12.0.2.15 or later to remediate the vulnerability.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
M4300 28g FirmwareOperating system
Affected:< 12.0.2.15
M4300 52g FirmwareOperating system
Affected:< 12.0.2.15
M4300 28g Poe\+ FirmwareOperating system
Affected:< 12.0.2.15
M4300 52g Poe\+ FirmwareOperating system
Affected:< 12.0.2.15
M4300 8x8f FirmwareOperating system
Affected:< 12.0.2.15
M4300 12x12f FirmwareOperating system
Affected:< 12.0.2.15
M4300 24x24f FirmwareOperating system
Affected:< 12.0.2.15
M4300 24x FirmwareOperating system
Affected:< 12.0.2.15

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
None
User interaction
Required
Scope
Changed
Confidentiality
Low
Integrity
Low
Availability
None

CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify the device model
    Access the device web interface or check physical labeling to confirm the exact NETGEAR model (M4300 series variants or M4200)
    Affected if The device is any M4300 series or M4200 model
  2. Determine the firmware version
    Log into the web interface and navigate to the firmware or status page to view the current firmware version, or use the device's CLI command to display firmware information
    Affected if The firmware version is lower than 12.0.2.15
  3. Confirm web interface is accessible
    Verify that the HTTP/HTTPS web management interface is enabled and reachable on the device
    Affected if The web interface is enabled and accessible (required for the XSS to be exploitable)
  4. Compare version to affected range
    Compare your installed firmware version against the vulnerable range: all versions < 12.0.2.15 for the listed M4300 models
    Affected if Firmware version is 12.0.2.14 or lower

You are affected if you have a NETGEAR M4300 series or M4200 switch running firmware version 12.0.2.14 or lower with the web interface enabled.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Upgrade available Upgrade to 12.0.2.15 or later
Fixed in 12.0.2.15
Interim mitigation

Upgrade NETGEAR device firmware to version 12.0.2.15 or later to remediate the vulnerability.

Fix this in M4300 28g Firmware Scoped from the published advisory
  • Consultation4.0 h
  • Implementation6.0 h
  • Testing4.0 h
  • Review / QA2.0 h
16.0 hours of engineering $2,840
Get the upgrade done

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $4,544.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2017-18834 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2017-18834 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data