dbcve.org
E Alert FirmwareOperating system · Philips

CVE-2018-8846

MEDIUM · 6.1 CVSS v3.0 Published 2018-09-26
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
68/100
Remediation priority · Elevated
Remotely reachable No privileges

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Philips e-Alert Unit (non-medical device), Version R2.1 and prior. The software does not neutralize or incorrectly neutralizes user-controllable input before it is placed in output that is used as a web page that is then served to other users.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

Cross-site scripting (XSS) vulnerability in Philips e-Alert Unit web interface. The application fails to properly sanitize user-supplied input before rendering it in web pages, allowing malicious script execution in the context of other users' browsers.

MitigationImplement proper input validation and output encoding for all user-controllable fields in the web application. Apply vendor-provided security patches for the e-Alert Unit R2.1 and prior versions.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
E Alert FirmwareOperating system
Affected:<= r2.1

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
None
User interaction
Required
Scope
Changed
Confidentiality
Low
Integrity
Low
Availability
None

CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify Philips e-Alert Unit in the environment
    Locate any Philips e-Alert hardware appliances or software installations within your network inventory or infrastructure scans
    Affected if The device or software is present in the environment
  2. Determine e-Alert firmware version
    Access the e-Alert Unit administrative interface or check system information to retrieve the installed firmware version number
    Affected if The firmware version is r2.1 or any version prior to r2.1
  3. Verify web interface is accessible
    Confirm that the e-Alert web management interface is enabled and network-accessible (typically on ports 80 or 443)
    Affected if The web interface is enabled and exposed on the network

You are affected if a Philips e-Alert Unit with firmware r2.1 or earlier is present and its web interface is enabled and accessible

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Implement proper input validation and output encoding for all user-controllable fields in the web application. Apply vendor-provided security patches for the e-Alert Unit R2.1 and prior versions.

Fix this in E Alert Firmware Scoped from the published advisory
  • Consultation4.0 h
  • Implementation8.0 h
  • Testing6.0 h
  • Review / QA4.0 h
22.0 hours of engineering $3,860
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $6,176.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2018-8846 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

Get it on GitHub Scan in the browser

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2018-8846 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data