Veradius Unity FirmwareOperating system · Philips

CVE-2019-18263

MEDIUM · 6.5 CVSS v3.1 Published 2019-12-20
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
70/100
Remediation priority · Elevated
No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
An issue was found in Philips Veradius Unity, Pulsera, and Endura Dual WAN Router, Veradius Unity (718132) with wireless option (shipped between 2016-August 2018), Veradius Unity (718132) with ViewForum option (shipped between 2016-August 2018), Pulsera (718095) and Endura (718075) with wireless option (shipped between 26-June-2017 through 07-August 2018), Pulsera (718095) and Endura (718075) with ViewForum option (shipped between 26-June-2017 through 07-August 2018). The router software uses an encryption scheme that is not strong enough for the level of protection required.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

The affected Philips router devices (Veradius Unity, Pulsera, and Endura Dual WAN Router) ship with an encryption scheme deemed insufficient for the required protection level. This weakness could allow an attacker with network access to potentially intercept or decrypt sensitive communications, depending on the specific weak algorithm implemented.

MitigationContact Philips for the latest firmware update that addresses the weak encryption. Until patched, restrict network access to these devices and monitor for suspicious traffic patterns.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Veradius Unity FirmwareOperating system
Affected:all versions
Pulsera FirmwareOperating system
Affected:all versions
Endura FirmwareOperating system
Affected:all versions

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Adjacent
Complexity
Low
Privileges
None
User interaction
None
Scope
Unchanged
Confidentiality
None
Integrity
None
Availability
High

CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify the device model
    Access the device web interface or console and confirm the exact model name and firmware version. For Philips Veradius Unity, Pulsera, or Endura Dual WAN Router, all firmware versions are affected.
    Affected if The device is a Philips Veradius Unity, Pulsera, or Endura Dual WAN Router running any firmware version.
  2. Check the encryption configuration
    Access the router settings or configuration interface and review the VPN, wireless, or network encryption settings. Look for the specific encryption algorithm in use (such as WEP, weak VPN ciphers, or outdated SSL/TLS versions).
    Affected if The device is configured to use weak or outdated encryption algorithms (such as WEP, weak ciphers, or known-vulnerable SSL/TLS versions).
  3. Verify default credentials are still active
    Attempt to log into the device administration panel using default credentials or check if default credentials are documented in the device documentation.
    Affected if Default administrator credentials remain unchanged, indicating weak security posture.
  4. Assess network exposure
    Determine if the device management interface is accessible from untrusted networks. Check firewall rules and access control lists for the device IP address.
    Affected if The device management or VPN interface is exposed to the internet or untrusted networks without proper filtering.
  5. Inspect for suspicious traffic
    Monitor network logs or capture traffic destined for the device. Look for unusual connection attempts, man-in-the-middle indicators, or decryption attempts.
    Affected if Unusual traffic patterns, repeated decryption failures, or suspicious tunnel establishment attempts are observed.

A user is affected if they operate any Philips Veradius Unity, Pulsera, or Endura Dual WAN Router device with default or weak encryption settings exposed to network access.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Contact Philips for the latest firmware update that addresses the weak encryption. Until patched, restrict network access to these devices and monitor for suspicious traffic patterns.

Fix this in Veradius Unity Firmware Scoped from the published advisory
  • Consultation4.0 h
  • Implementation8.0 h
  • Testing6.0 h
  • Review / QA2.0 h
20.0 hours of engineering $3,500
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $5,600.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2019-18263 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2019-18263 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data