Mir100 FirmwareOperating system · Mobile Industrial Robots

CVE-2020-10274

HIGH · 7.1 CVSS v3.1 Published 2020-06-24
Fix available
A fix is available. Upgrade to after 2.8.1.1 or later.
See remediation →
77/100
Remediation priority · High
Remotely reachable Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
The access tokens for the REST API are directly derived (sha256 and base64 encoding) from the publicly available default credentials from the Control Dashboard (refer to CVE-2020-10270 for related flaws). This flaw in combination with CVE-2020-10273 allows any attacker connected to the robot networks (wired or wireless) to exfiltrate all stored data (e.g. indoor mapping images) and associated metadata from the robot's database.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · high confidence

The REST API access tokens are derived using sha256 and base64 encoding from publicly available default credentials from the Control Dashboard. Combined with CVE-2020-10273, this allows any attacker with network access (wired or wireless) to the robot network to exfiltrate all stored data including indoor mapping images and associated metadata from the robot's database.

MitigationImmediately change all default credentials on the Control Dashboard and implement proper secure token generation that is independent of credentials. Additionally, segment the robot network and revoke all exposed tokens to prevent ongoing data exfiltration.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Mir100 FirmwareOperating system
Affected:<= 2.8.1.1
Mir200 FirmwareOperating system
Affected:all versions
Mir250 FirmwareOperating system
Affected:all versions
Mir500 FirmwareOperating system
Affected:all versions
Mir1000 FirmwareOperating system
Affected:all versions
Er200 FirmwareOperating system
Affected:all versions
Er Lite FirmwareOperating system
Affected:all versions
Er Flex FirmwareOperating system
Affected:all versions

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
Low
User interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
Low
Availability
None

CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:L/A:N

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify affected robot products on your network
    Scan your network for devices with product identifiers: Mir100, Mir200, Mir250, Mir500, Mir1000, Er200, Er Lite, or Er Flex. Check the robot's web interface or documentation for firmware version information.
    Affected if Any of these robot models are present on your network and the Control Dashboard is network-accessible.
  2. Check if Control Dashboard is network-accessible
    Attempt to access the robot's Control Dashboard web interface from a non-localhost IP address. Look for HTTP/HTTPS responses on common ports like 80, 443, 8080.
    Affected if The Control Dashboard is reachable from network segments accessible to untrusted users.
  3. Verify default credentials are still active
    Attempt to log in to the Control Dashboard using the publicly known default credentials (refer to CVE-2020-10273 for the specific default username/password pairs).
    Affected if Default credentials still grant access to the Control Dashboard.
  4. Test REST API token generation from default credentials
    Use the default credentials to authenticate against the REST API endpoint and observe if access tokens are generated using sha256 and base64 derivation from those credentials.
    Affected if REST API access tokens can be generated using default credentials, allowing unauthorized data access.

You are affected if any Mir or Easyrobotics robot with a network-accessible Control Dashboard still uses default credentials, allowing attackers to derive REST API tokens and exfiltrate data.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Upgrade available Upgrade to a release after 2.8.1.1
Interim mitigation

Immediately change all default credentials on the Control Dashboard and implement proper secure token generation that is independent of credentials. Additionally, segment the robot network and revoke all exposed tokens to prevent ongoing data exfiltration.

Fix this in Mir100 Firmware Scoped from the published advisory
  • Consultation8.0 h
  • Implementation16.0 h
  • Testing8.0 h
  • Review / QA4.0 h
36.0 hours of engineering $6,400
Get the upgrade done

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $10,240.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2020-10274 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2020-10274 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data