Ata 190 FirmwareOperating system · Cisco
CVE-2021-34735
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedMultiple vulnerabilities in the Cisco ATA 190 Series Analog Telephone Adapter Software could allow an attacker to perform a command injection attack resulting in remote code execution or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · moderate confidenceMultiple command injection vulnerabilities exist in Cisco ATA 190 Series Analog Telephone Adapter Software that could allow an unauthenticated remote attacker to execute arbitrary commands on the underlying operating system, potentially achieving remote code execution, or cause a denial of service by destabilizing the device.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data
Ata 190 FirmwareOperating system
all versions
Ata 191 FirmwareOperating system
all versions
Ata 192 FirmwareOperating system
all versionsCVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Privileges
- None
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- None
- Integrity
- None
- Availability
- High
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Identify the device modelAccess the device web interface or check the physical device label for the model number. Look for ATA 190, ATA 191, or ATA 192 designations.Affected if The device model is Cisco ATA 190, ATA 191, or ATA 192 Series Analog Telephone Adapter
-
Confirm the firmware versionLog into the device web interface and navigate to the System Information or Administration page to view the installed firmware version.Affected if Any firmware version is installed on an ATA 190 series device (all versions are affected)
-
Verify network exposure of the management interfaceCheck if the device management interface (HTTP/HTTPS ports) is accessible from untrusted networks by reviewing firewall rules, NAT configurations, or VLAN assignments.Affected if The device management interface is exposed to untrusted networks or the internet
If you have a Cisco ATA 190, 191, or 192 device running any firmware version and its management interface is network-accessible, you are affected by this vulnerability.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataApply the Cisco-provided firmware update for the ATA 190 series; if unavailable, restrict network access to management interfaces and segment affected devices in a hardened network zone to reduce attack surface.
Fix this in Ata 190 Firmware
Scoped from the published advisory
- Consultation4.0 h
- Implementation3.0 h
- Testing4.0 h
- Review / QA2.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $3,680.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2021-34735 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2021-34735 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data