Linux KernelOperating system · Linux

CVE-2022-50008

MEDIUM · 5.5 CVSS v3.1 Published 2025-06-18

Fix available

A fix is available. Upgrade to 4.9.327 / 4.14.292 or later.

See remediation →

57/100

Remediation priority · Elevated

Zero-click Patch available

Official description

NVD · unedited

In the Linux kernel, the following vulnerability has been resolved: kprobes: don't call disarm_kprobe() for disabled kprobes The assumption in __disable_kprobe() is wrong, and it could try to disarm an already disarmed kprobe and fire the WARN_ONCE() below. [0] We can easily reproduce this issue. 1. Write 0 to /sys/kernel/debug/kprobes/enabled. # echo 0 > /sys/kernel/debug/kprobes/enabled 2. Run execsnoop. At this time, one kprobe is disabled. # /usr/share/bcc/tools/execsnoop & [1] 2460 PCOMM PID PPID RET ARGS # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE] 3. Write 1 to /sys/kernel/debug/kprobes/enabled, which changes kprobes_all_disarmed to false but does not arm the disabled kprobe. # echo 1 > /sys/kernel/debug/kprobes/enabled # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE] 4. Kill execsnoop, when __disable_kprobe() calls disarm_kprobe() for the disabled kprobe and hits the WARN_ONCE() in __disarm_kprobe_ftrace(). # fg /usr/share/bcc/tools/execsnoop ^C Actually, WARN_ONCE() is fired twice, and __unregister_kprobe_top() misses some cleanups and leaves the aggregated kprobe in the hash table. Then, __unregister_trace_kprobe() initialises tk->rp.kp.list and creates an infinite loop like this. aggregated kprobe.list -> kprobe.list -. ^ | '.__.' In this situation, these commands fall into the infinite loop and result in RCU stall or soft lockup. cat /sys/kernel/debug/kprobes/list : show_kprobe_addr() enters into the infinite loop with RCU. /usr/share/bcc/tools/execsnoop : warn_kprobe_rereg() holds kprobe_mutex, and __get_valid_kprobe() is stuck in the loop. To avoid the issue, make sure we don't call disarm_kprobe() for disabled kprobes. [0] Failed to disarm kprobe-ftrace at __x64_sys_execve+0x0/0x40 (error -2) WARNING: CPU: 6 PID: 2460 at kernel/kprobes.c:1130 __disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Modules linked in: ena CPU: 6 PID: 2460 Comm: execsnoop Not tainted 5.19.0+ #28 Hardware name: Amazon EC2 c5.2xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:__disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Code: 24 8b 02 eb c1 80 3d c4 83 f2 01 00 75 d4 48 8b 75 00 89 c2 48 c7 c7 90 fa 0f 92 89 04 24 c6 05 ab 83 01 e8 e4 94 f0 ff <0f> 0b 8b 04 24 eb b1 89 c6 48 c7 c7 60 fa 0f 92 89 04 24 e8 cc 94 RSP: 0018:ffff9e6ec154bd98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffff930f7b00 RCX: 0000000000000001 RDX: 0000000080000001 RSI: ffffffff921461c5 RDI: 00000000ffffffff RBP: ffff89c504286da8 R08: 0000000000000000 R09: c0000000fffeffff R10: 0000000000000000 R11: ffff9e6ec154bc28 R12: ffff89c502394e40 R13: ffff89c502394c00 R14: ffff9e6ec154bc00 R15: 0000000000000000 FS: 00007fe800398740(0000) GS:ffff89c812d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c00057f010 CR3: 0000000103b54006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> __disable_kprobe (kernel/kprobes.c:1716) disable_kprobe (kernel/kprobes.c:2392) __disable_trace_kprobe (kernel/trace/trace_kprobe.c:340) disable_trace_kprobe (kernel/trace/trace_kprobe.c:429) perf_trace_event_unreg.isra.2 (./include/linux/tracepoint.h:93 kernel/trace/trace_event_perf.c:168) perf_kprobe_destroy (kernel/trace/trace_event_perf.c:295) _free_event (kernel/events/core.c:4971) perf_event_release_kernel (kernel/events/core.c:5176) perf_release (kernel/events/core.c:5186) __fput (fs/file_table.c:321) task_work_run (./include/linux/ ---truncated---

Technical summary

dbcve analysis

How this class of weakness works · CWE-835

Crafted input drives a loop whose exit condition is never satisfied, hanging the thread and starving the service of the resource it occupies. A single request can be enough to take a worker down. Remediation is bounding iteration counts and validating the conditions that are supposed to terminate the loop.

General guidance for the infinite loop class — the official description and references above are authoritative for this specific CVE. Want a bespoke review and a reviewed fix? Ask our team →

Affected products & versions

NVD · CPE data

Linux KernelOperating system

Affected:>= 4.0, < 4.9.327>= 4.10, < 4.14.292>= 4.15, < 4.19.257>= 4.20, < 5.4.212>= 5.5, < 5.10.141>= 5.11, < 5.15.65>= 5.16, < 5.19.6= 6.0

CVSS breakdown

From the vector

Attack vector: Local
Complexity: Low
Privileges: Low
User interaction: None
Scope: Unchanged
Confidentiality: None
Integrity: None
Availability: High

CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Remediation

dbcve · scoped

Upgrade available Upgrade to 4.9.327 / 4.14.292 / 4.19.257 or later

Fixed in 4.9.3274.14.2924.19.257

Vendor patch git.kernel.org →

Recommended fix High confidence

Linux kernel 5.4.212 or later (or the equivalent fixed release for your branch: 4.9.327, 4.14.292, or 4.19.257)

1. Identify the currently running Linux kernel version using `uname -r`
2. Check which version branch your kernel is based on (e.g., 4.9.x, 4.14.x, 4.19.x, 5.4.x)
3. Upgrade to a kernel version that includes the fix: for 4.9.x upgrade to >= 4.9.327; for 4.14.x upgrade to >= 4.14.292; for 4.19.x upgrade to >= 4.19.257; for 5.4.x upgrade to >= 5.4.212
4. For production systems, prefer using your distribution's stable/ LTS kernel packages rather than building from source
5. After reboot, verify the kernel version is fixed: `uname -r` should show a version >= the appropriate fixed release for your branch
6. Confirm the fix is present by checking the kprobes code: the patch at commit 19cd630712e7c13a3dedfc6986a9b983fed6fd98 adds a check to avoid calling disarm_kprobe() for disabled kprobes

Caveat Kernel upgrades may require system reboot and could have compatibility implications with existing kernel modules or system configurations. Test thoroughly in a non-production environment before deploying.

Generated from the published advisory — verify against the referenced sources before acting.

We can perform the upgrade in your staging environment and verify nothing breaks — typical engagement from $1,600. Get the upgrade done

Scan for this in your stack

Free · runs locally

dbcve dependency scanner

Check whether your project pulls in CVE-2022-50008 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

Get it on GitHub Scan in the browser

References

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2022-50008 in production — separate from our analysis above.

Notes0 Guidelines

Know something about CVE-2022-50008?

The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.

The version that genuinely resolved it — not the one the vendor claimed
A config change or rule that shut the vector down
A gotcha in the upgrade path that cost you an afternoon

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here

Verified mitigations, workarounds, and config changes
Version or environment caveats, and links to real fixes
No weaponised exploit code, or anything meant to cause harm
No spam, self-promotion, credentials, or personal data

At a glance

A fix existsUpgrade to 4.9.327 / 4.14.292 or later

Severity 5.5 Medium

Exploit likelihood EPSS, next 30 days 0.2%

Affects: Linux Kernel

Remediation

Need this fixed?

Get a fix

Estimated effortfrom ~9 hrs

ComplexityModerate

Typical engagementfrom $1,600

What a fix involves

We scope it with you and confirm a fixed quote
A specialist builds a reviewed fix
You deploy it to staging first
Optional re-test once it’s live

We specialise in CVE remediation. Send your environment and we’ll scope CVE-2022-50008 and return a fixed quote.

You’ll deal with our team directly and deploy the reviewed fix to staging first — never straight to production.

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

Scan for this in your stack

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Practitioner notes

No notes yet

Official description

Technical summary

Affected products & versions

CVSS breakdown

Remediation

References