Xbc Dn32u FirmwareOperating system · Ls Electric

CVE-2023-0103

HIGH · 7.5 CVSS v3.1 Published 2023-02-15
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
84/100
Remediation priority · High
Remotely reachable No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
If an attacker were to access memory locations of LS ELECTRIC XBC-DN32U with operating system version 01.80 that are outside of the communication buffer, the device stops operating. This could allow an attacker to cause a denial-of-service condition.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

This is an out-of-bounds memory access vulnerability in LS ELECTRIC XBC-DN32U PLCs running OS version 01.80. An attacker who accesses memory locations outside the defined communication buffer can trigger a device stop condition, resulting in denial of service.

MitigationIf available, apply the vendor firmware update for OS version 01.80. Otherwise, implement network segmentation and restrict access to the PLC's communication interfaces to minimize attack surface.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Xbc Dn32u FirmwareOperating system
Affected:= 01.80

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
None
User interaction
None
Scope
Unchanged
Confidentiality
None
Integrity
None
Availability
High

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify PLC model
    Locate and verify the device model number on the physical PLC hardware or in the device documentation/configuration software
    Affected if Model is LS ELECTRIC XBC-DN32U
  2. Check firmware version
    Access the PLC's firmware version information through the vendor's configuration tool, boot menu, or system information interface
    Affected if Firmware version is exactly 01.80
  3. Verify communication interface exposure
    Determine if the PLC's communication interfaces (Ethernet, serial, or other network protocols) are accessible from network segments beyond the local control network
    Affected if Communication interfaces are exposed to untrusted networks or directly accessible without firewall restrictions
  4. Confirm PLC is operational
    Monitor the PLC runtime status through the vendor's programming software or device diagnostics
    Affected if PLC experiences unexpected stop condition or becomes unresponsive during normal communication operations

Your environment is affected if you are running an LS ELECTRIC XBC-DN32U PLC with firmware version 01.80 and the communication interface is network-accessible to potential attackers.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

If available, apply the vendor firmware update for OS version 01.80. Otherwise, implement network segmentation and restrict access to the PLC's communication interfaces to minimize attack surface.

Fix this in Xbc Dn32u Firmware Scoped from the published advisory
  • Consultation4.0 h
  • Implementation8.0 h
  • Testing12.0 h
  • Review / QA4.0 h
28.0 hours of engineering $4,760
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $7,616.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2023-0103 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2023-0103 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data