Xbc Dn32u FirmwareOperating system · Ls Electric

CVE-2023-22806

HIGH · 7.5 CVSS v3.1 Published 2023-02-15
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
84/100
Remediation priority · High
Remotely reachable No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
LS ELECTRIC XBC-DN32U with operating system version 01.80 transmits sensitive information in cleartext when communicating over its XGT protocol. This could allow an attacker to gain sensitive information such as user credentials.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · high confidence

The LS ELECTRIC XBC-DN32U PLC with OS version 01.80 transmits sensitive information including user credentials in cleartext over the XGT protocol. An attacker on the network can intercept these communications to obtain authentication credentials.

MitigationEnable encryption for XGT protocol communications or upgrade to a firmware version that enforces encrypted communication. Network segmentation should be implemented to restrict unauthorized access to the PLC.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Xbc Dn32u FirmwareOperating system
Affected:= 01.80

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
None
User interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
None
Availability
None

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify PLC model
    Check the device model through the XGT programming software (XG5000) or device documentation to confirm the unit is XBC-DN32U
    Affected if The model is XBC-DN32U
  2. Check firmware version
    Using XG5000 software or PLC system information, retrieve the OS firmware version installed on the PLC
    Affected if The firmware version is exactly 01.80
  3. Verify XGT protocol is in use
    Check PLC communication configuration in XG5000 under network settings to confirm the XGT protocol is enabled and configured for communication
    Affected if XGT protocol is enabled and configured for network communication
  4. Check XGT encryption status
    Inspect the XGT protocol security or encryption settings in the PLC configuration. Look for whether encryption is enforced, disabled, or optional for XGT communications
    Affected if Encryption is disabled or not enforced for XGT protocol communications

You are affected if you have an XBC-DN32U PLC with firmware version 01.80 using the XGT protocol with encryption disabled or not enforced.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Enable encryption for XGT protocol communications or upgrade to a firmware version that enforces encrypted communication. Network segmentation should be implemented to restrict unauthorized access to the PLC.

Fix this in Xbc Dn32u Firmware Scoped from the published advisory
  • Consultation4.0 h
  • Implementation8.0 h
  • Testing6.0 h
  • Review / QA4.0 h
22.0 hours of engineering $3,860
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $6,176.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2023-22806 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2023-22806 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data