Rv110w FirmwareOperating system · Cisco

CVE-2023-20250

HIGH · 7.2 CVSS v3.1 Published 2023-09-06
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
78/100
Remediation priority · High
Remotely reachable Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device. This vulnerability is due to improper validation of requests that are sent to the web-based management interface. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary code with root privileges on an affected device. To exploit this vulnerability, the attacker must have valid Administrator credentials on the affected device.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · high confidence

Authenticated command injection vulnerability in Cisco Small Business RV series routers (RV110W, RV130, RV130W, RV215W). The web-based management interface fails to properly validate requests, allowing an attacker with valid Administrator credentials to send crafted requests that result in arbitrary code execution with root privileges.

MitigationApply Cisco firmware updates when available; if no patch exists, restrict web management interface access to trusted networks only, enforce strong Administrator passwords, and consider disabling remote management entirely.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Rv110w FirmwareOperating system
Affected:= 1.0.0.2= 1.0.0.21= 1.0.0.30= 1.0.1.1= 1.0.1.3= 1.0.1.6= 1.0.1.99= 1.0.2.7= 1.0.2.99= 1.0.3.14= 1.0.3.16= 1.0.3.22
Rv130 FirmwareOperating system
Affected:= 1.0.0.2= 1.0.0.21= 1.0.0.30= 1.0.1.1= 1.0.1.3= 1.0.1.6= 1.0.1.99= 1.0.2.7= 1.0.2.99= 1.0.3.14= 1.0.3.16= 1.0.3.22
Rv130w FirmwareOperating system
Affected:= 1.0.0.2= 1.0.0.21= 1.0.0.30= 1.0.1.1= 1.0.1.3= 1.0.1.6= 1.0.1.99= 1.0.2.7= 1.0.2.99= 1.0.3.14= 1.0.3.16= 1.0.3.22
Rv215w FirmwareOperating system
Affected:= 1.0.0.2= 1.0.0.21= 1.0.0.30= 1.0.1.1= 1.0.1.3= 1.0.1.6= 1.0.1.99= 1.0.2.7= 1.0.2.99= 1.0.3.14= 1.0.3.16= 1.0.3.22

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
High
User interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
High

CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify the router model
    Access the router web interface and navigate to Status or System Summary page, or inspect the physical device label
    Affected if Device model is RV110W, RV130, RV130W, or RV215W
  2. Check the firmware version
    Log into the web interface and go to Status > System Summary to view the firmware version, or check via CLI if available
    Affected if Firmware version is exactly 1.0.0.2, 1.0.0.21, 1.0.0.30, 1.0.1.1, 1.0.1.3, 1.0.1.6, 1.0.1.99, 1.0.2.7, 1.0.2.99, 1.0.3.14, 1.0.3.16, or 1.0.3.22
  3. Verify Administrator access is possible
    Attempt to log into the web interface with valid Administrator credentials
    Affected if Valid Administrator credentials can be used to authenticate to the web interface

If the device is an RV110W, RV130, RV130W, or RV215W running one of the listed firmware versions AND the web management interface is accessible with valid Administrator credentials, the environment is affected by CVE-2023-20250.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

dbcve · scoped
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Apply Cisco firmware updates when available; if no patch exists, restrict web management interface access to trusted networks only, enforce strong Administrator passwords, and consider disabling remote management entirely.

Recommended fix Moderate confidence

Firmware version specified in Cisco Security Advisory for CVE-2023-20250 (check sec.cloudapps.cisco.com for the exact fixed release for your model)

  1. 1. Identify the exact router model (RV110W, RV130, RV130W, or RV215W) from the affected device.
  2. 2. Access the Cisco Security Advisories page at sec.cloudapps.cisco.com and search for CVE-2023-20250.
  3. 3. Locate the advisory for Cisco Small Business RV Series Routers Management Interface Arbitrary Code Execution vulnerability.
  4. 4. Download the firmware update version specified in the Fixed Releases section for your specific router model.
  5. 5. Back up the current router configuration.
  6. 6. Log in to the router's web-based management interface as Administrator.
  7. 7. Navigate to the Administration or System section and locate the firmware upgrade option.
  8. 8. Upload and apply the new firmware version.
Caveat Review Cisco release notes for any configuration changes required after upgrade; ensure Administrator credentials are maintained

Generated from the published advisory — verify against the referenced sources before acting.

Fix this in Rv110w Firmware Scoped from the published advisory
  • Consultation6.0 h
  • Implementation8.0 h
  • Testing4.0 h
  • Review / QA2.0 h
20.0 hours of engineering $3,600
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $5,760.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2023-20250 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2023-20250 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data