CVE-2023-39172
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedThe affected devices transmit sensitive information unencrypted allowing a remote unauthenticated attacker to capture and modify network traffic.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · moderate confidenceAffected devices transmit sensitive information over the network without encryption, allowing a remote unauthenticated attacker to perform a man-in-the-middle attack to capture and modify traffic containing sensitive data.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE dataall versionsCVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Privileges
- None
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- None
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Confirm device modelIdentify if the target system is an Enbw Senec Storage Box by checking the device label, management interface, or system inventoryAffected if The device is an Enbw Senec Storage Box with any firmware version
-
Check network configuration for encryptionAccess the device web interface or CLI and review network settings for TLS/SSL, HTTPS, or encryption options. Look for protocol settings (HTTP vs HTTPS) and certificate configurationsAffected if Network communication settings show unencrypted protocols (HTTP instead of HTTPS) or encryption is disabled/not configured
-
Capture and inspect network trafficUse a network packet capture tool (such as Wireshark or tcpdump) on the network segment to observe traffic from the device. Examine if sensitive data (credentials, personal information, energy usage data) is transmitted in plaintextAffected if Packet capture reveals sensitive data transmitted without TLS encryption or other protective encoding
-
Verify certificate validation settingsCheck device settings for certificate validation, CA certificate configuration, or TLS certificate management options. Confirm if the device validates server certificates during communicationAffected if Certificate validation is disabled, self-signed certificates are accepted without verification, or no certificate configuration exists
If the device is an Enbw Senec Storage Box and network communications carrying sensitive data are transmitted without encryption or proper certificate validation, the environment is affected by this vulnerability.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataImplement TLS/encryption for all network communications carrying sensitive data, disable unencrypted protocols, and ensure proper certificate validation.
- Consultation6.0 h
- Implementation12.0 h
- Testing6.0 h
- Review / QA4.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $7,968.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2023-39172 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2023-39172 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data