Linux KernelOperating system · Linux

CVE-2025-38470

MEDIUM · 5.5 CVSS v3.1 Published 2025-07-28

Fix available

A fix is available. Upgrade to 5.4.297 / 5.10.241 or later.

See remediation →

57/100

Remediation priority · Elevated

Zero-click Patch available

Official description

NVD · unedited

In the Linux kernel, the following vulnerability has been resolved: net: vlan: fix VLAN 0 refcount imbalance of toggling filtering during runtime Assuming the "rx-vlan-filter" feature is enabled on a net device, the 8021q module will automatically add or remove VLAN 0 when the net device is put administratively up or down, respectively. There are a couple of problems with the above scheme. The first problem is a memory leak that can happen if the "rx-vlan-filter" feature is disabled while the device is running: # ip link add bond1 up type bond mode 0 # ethtool -K bond1 rx-vlan-filter off # ip link del dev bond1 When the device is put administratively down the "rx-vlan-filter" feature is disabled, so the 8021q module will not remove VLAN 0 and the memory will be leaked [1]. Another problem that can happen is that the kernel can automatically delete VLAN 0 when the device is put administratively down despite not adding it when the device was put administratively up since during that time the "rx-vlan-filter" feature was disabled. null-ptr-unref or bug_on[2] will be triggered by unregister_vlan_dev() for refcount imbalance if toggling filtering during runtime: $ ip link add bond0 type bond mode 0 $ ip link add link bond0 name vlan0 type vlan id 0 protocol 802.1q $ ethtool -K bond0 rx-vlan-filter off $ ifconfig bond0 up $ ethtool -K bond0 rx-vlan-filter on $ ifconfig bond0 down $ ip link del vlan0 Root cause is as below: step1: add vlan0 for real_dev, such as bond, team. register_vlan_dev vlan_vid_add(real_dev,htons(ETH_P_8021Q),0) //refcnt=1 step2: disable vlan filter feature and enable real_dev step3: change filter from 0 to 1 vlan_device_event vlan_filter_push_vids ndo_vlan_rx_add_vid //No refcnt added to real_dev vlan0 step4: real_dev down vlan_device_event vlan_vid_del(dev, htons(ETH_P_8021Q), 0); //refcnt=0 vlan_info_rcu_free //free vlan0 step5: delete vlan0 unregister_vlan_dev BUG_ON(!vlan_info); //vlan_info is null Fix both problems by noting in the VLAN info whether VLAN 0 was automatically added upon NETDEV_UP and based on that decide whether it should be deleted upon NETDEV_DOWN, regardless of the state of the "rx-vlan-filter" feature. [1] unreferenced object 0xffff8880068e3100 (size 256): comm "ip", pid 384, jiffies 4296130254 hex dump (first 32 bytes): 00 20 30 0d 80 88 ff ff 00 00 00 00 00 00 00 00 . 0............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 81ce31fa): __kmalloc_cache_noprof+0x2b5/0x340 vlan_vid_add+0x434/0x940 vlan_device_event.cold+0x75/0xa8 notifier_call_chain+0xca/0x150 __dev_notify_flags+0xe3/0x250 rtnl_configure_link+0x193/0x260 rtnl_newlink_create+0x383/0x8e0 __rtnl_newlink+0x22c/0xa40 rtnl_newlink+0x627/0xb00 rtnetlink_rcv_msg+0x6fb/0xb70 netlink_rcv_skb+0x11f/0x350 netlink_unicast+0x426/0x710 netlink_sendmsg+0x75a/0xc20 __sock_sendmsg+0xc1/0x150 ____sys_sendmsg+0x5aa/0x7b0 ___sys_sendmsg+0xfc/0x180 [2] kernel BUG at net/8021q/vlan.c:99! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 382 Comm: ip Not tainted 6.16.0-rc3 #61 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:unregister_vlan_dev (net/8021q/vlan.c:99 (discriminator 1)) RSP: 0018:ffff88810badf310 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88810da84000 RCX: ffffffffb47ceb9a RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88810e8b43c8 RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff6cefe80 R10: ffffffffb677f407 R11: ffff88810badf3c0 R12: ffff88810e8b4000 R13: 0000000000000000 R14: ffff88810642a5c0 R15: 000000000000017e FS: 00007f1ff68c20c0(0000) GS:ffff888163a24000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1ff5dad240 CR3: 0000000107e56000 CR4: 00000000000006f0 Call Trace: <TASK ---truncated---

Technical summary

dbcve analysis

A detailed technical summary for this CVE is being prepared.

Affected products & versions

NVD · CPE data

Linux KernelOperating system

Affected:>= 2.6.36, < 5.4.297>= 5.5, < 5.10.241>= 5.11, < 5.15.190>= 5.16, < 6.1.147>= 6.2, < 6.6.100>= 6.7, < 6.12.40>= 6.13, < 6.15.8= 6.16

Debian LinuxOperating system

Affected:= 11.0

CVSS breakdown

From the vector

Attack vector: Local
Complexity: Low
Privileges: Low
User interaction: None
Scope: Unchanged
Confidentiality: None
Integrity: None
Availability: High

CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Remediation

dbcve · scoped

Upgrade available Upgrade to 5.4.297 / 5.10.241 / 5.15.190 or later

Fixed in 5.4.2975.10.2415.15.190

Vendor patch git.kernel.org →

Recommended fix High confidence

Upgrade to kernel version 5.4.297, 5.10.241, 5.15.190, or 6.1.147 (or later) depending on your current branch

Identify the current running kernel version using 'uname -r'
Determine which version branch the current kernel belongs to (e.g., 5.4.x, 5.10.x, 5.15.x, or 6.1.x)
For Debian 11 (bullseye), check for available kernel updates via 'apt update' and 'apt-cache policy linux-image-*'
Upgrade to a fixed kernel version: 5.4.297+, 5.10.241+, 5.15.190+, or 6.1.147+ depending on your branch
Reboot the system to load the new kernel
Verify the kernel version after reboot using 'uname -r' to confirm the fix is applied

Caveat Kernel upgrades may require system reboot and could have compatibility implications with proprietary kernel modules or specific hardware drivers; test in staging first

Generated from the published advisory — verify against the referenced sources before acting.

We can perform the upgrade in your staging environment and verify nothing breaks — typical engagement from $1,600. Get the upgrade done

Scan for this in your stack

Free · runs locally

dbcve dependency scanner

Check whether your project pulls in CVE-2025-38470 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

Get it on GitHub Scan in the browser

References

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2025-38470 in production — separate from our analysis above.

Notes0 Guidelines

Know something about CVE-2025-38470?

The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.

The version that genuinely resolved it — not the one the vendor claimed
A config change or rule that shut the vector down
A gotcha in the upgrade path that cost you an afternoon

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here

Verified mitigations, workarounds, and config changes
Version or environment caveats, and links to real fixes
No weaponised exploit code, or anything meant to cause harm
No spam, self-promotion, credentials, or personal data

At a glance

A fix existsUpgrade to 5.4.297 / 5.10.241 or later

Severity 5.5 Medium

Exploit likelihood EPSS, next 30 days 0.2%

Affects: Linux Kernel

Remediation

Need this fixed?

Get a fix

Estimated effortfrom ~9 hrs

ComplexityModerate

Typical engagementfrom $1,600

What a fix involves

We scope it with you and confirm a fixed quote
A specialist builds a reviewed fix
You deploy it to staging first
Optional re-test once it’s live

We specialise in CVE remediation. Send your environment and we’ll scope CVE-2025-38470 and return a fixed quote.

You’ll deal with our team directly and deploy the reviewed fix to staging first — never straight to production.

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

Scan for this in your stack

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Practitioner notes

No notes yet

Official description

Technical summary

Affected products & versions

CVSS breakdown

Remediation

References