CVE-2025-40581
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedA vulnerability has been identified in SCALANCE LPE9403 (6GK5998-3GS00-2AC2) (All versions with SINEMA Remote Connect Edge Client installed). Affected devices are vulnerable to an authentication bypass. This could allow a non-privileged local attacker to bypass the authentication of the SINEMA Remote Connect Edge Client, and to read and modify the configuration parameters.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · moderate confidenceAuthentication bypass vulnerability in SINEMA Remote Connect Edge Client running on SCALANCE LPE9403 industrial network devices allows a local attacker with non-privileged access to circumvent authentication mechanisms and read or modify configuration parameters.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE dataall versionsCVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Local
- Complexity
- Low
- Privileges
- Low
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- None
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Identify device modelAccess the device web interface or CLI and check the device model designation. For CLI, use 'display device-info' or similar command. Confirm the model is SCALANCE LPE9403.Affected if Device model is SCALANCE LPE9403
-
Check firmware versionIn the device web interface, navigate to System > Device Information or use CLI command 'display version' to retrieve the installed firmware version.Affected if Any firmware version is installed on the LPE9403 (all versions affected)
-
Verify SINEMA Remote Connect Edge Client statusAccess the device configuration interface and locate the SINEMA Remote Connect Edge Client service. Check if it is enabled and running. This is typically found under Remote Access or VPN configuration sections.Affected if SINEMA Remote Connect Edge Client is enabled on the device
-
Review authentication configurationExamine the authentication settings for the SINEMA Remote Connect Edge Client in the device configuration. Look for any non-privileged user accounts or authentication bypass settings.Affected if Non-privileged user accounts exist or authentication is configured to allow limited access
-
Audit configuration changesReview device logs and configuration change history for any unauthorized or unexpected modifications to SINEMA Remote Connect Edge Client settings or authentication parameters.Affected if Unexpected configuration changes are present or unauthorized access indicators exist
The environment is affected if a SCALANCE LPE9403 device with SINEMA Remote Connect Edge Client enabled is present, regardless of firmware version.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataRestrict physical and local access to affected devices; implement additional network segmentation and access controls; monitor for unauthorized configuration changes; contact Siemens for available patches or firmware updates.
- Consultation4.0 h
- Implementation8.0 h
- Testing6.0 h
- Review / QA2.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $5,600.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2025-40581 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2025-40581 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data