Wall Connector FirmwareOperating system · Tesla

CVE-2025-8320

HIGH · 8.8 CVSS v3.0 Published 2025-07-30
Fix available
A fix is available. Upgrade to 24.44.3 or later.
See remediation →
93/100
Remediation priority · Urgent
No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Tesla Wall Connector Content-Length Header Improper Input Validation Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Tesla Wall Connector devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the parsing of the HTTP Content-Length header. The issue results from the lack of proper validation of user-supplied data, which can result in memory access past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-26300.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · high confidence

Tesla Wall Connector devices contain an improper input validation vulnerability in the parsing of HTTP Content-Length headers. The lack of proper validation of user-supplied data allows memory access past the end of an allocated buffer, enabling an unauthenticated, network-adjacent attacker to execute arbitrary code in the device context.

MitigationApply firmware updates from Tesla when available; meanwhile, isolate Tesla Wall Connector devices on a restricted network segment and block external access to their management interfaces.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Wall Connector FirmwareOperating system
Affected:< 24.44.3

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Adjacent
Complexity
Low
Privileges
None
User interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
High

CVSS:3.0/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Locate the Tesla Wall Connector firmware version
    Access the device's web administration interface (typically at its IP address on the local network) and navigate to the About, System Information, or Settings section to find the firmware version display
    Affected if The displayed firmware version is lower than 24.44.3 (for example, 24.36.0, 24.12.2, etc.)
  2. Alternative firmware version check via Tesla mobile app
    Open the Tesla app, select the Wall Connector from your vehicles or devices, and look for firmware/version information in the device details or settings
    Affected if The app reports a firmware version below 24.44.3
  3. Confirm network HTTP service is accessible
    Attempt to access the Wall Connector's HTTP interface by browsing to its IP address on port 80 or 443
    Affected if The device responds to HTTP requests (the vulnerability requires the HTTP service to be running, which is default)
  4. Check for HTTP header handling exposure
    Send a crafted HTTP request with an abnormally large or malformed Content-Length header value to the device's web interface
    Affected if The device accepts the request without rejecting the invalid Content-Length (this is the vulnerable condition)

The environment is affected if the Tesla Wall Connector firmware version is below 24.44.3 and the device's HTTP management interface is accessible on the network.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

dbcve · scoped
Upgrade available Upgrade to 24.44.3 or later
Fixed in 24.44.3
Interim mitigation

Apply firmware updates from Tesla when available; meanwhile, isolate Tesla Wall Connector devices on a restricted network segment and block external access to their management interfaces.

Recommended fix High confidence

24.44.3 or later

  1. Identify all Tesla Wall Connector devices on the network that need to be remediated
  2. Access the admin interface or use the Tesla mobile app to check the current firmware version of each Wall Connector
  3. Download firmware version 24.44.3 or later from the official Tesla support channels
  4. Apply the firmware upgrade to each affected Wall Connector device following Tesla's official upgrade instructions
  5. Verify the upgrade was successful by confirming the firmware version is now 24.44.3 or higher

Generated from the published advisory — verify against the referenced sources before acting.

Fix this in Wall Connector Firmware Scoped from the published advisory
  • Consultation6.0 h
  • Implementation12.0 h
  • Testing6.0 h
  • Review / QA3.0 h
27.0 hours of engineering $4,800
Get the upgrade done

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $7,680.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2025-8320 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2025-8320 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data