dbcve.org
Linux KernelOperating system · Linux

CVE-2026-31415

MEDIUM · 5.5 CVSS v3.1 Published 2026-04-13
Fix available
A fix is available. Upgrade to 5.10.253 / 5.15.203 or later.
See remediation →
57/100
Remediation priority · Elevated
Zero-click Patch available

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
In the Linux kernel, the following vulnerability has been resolved: ipv6: avoid overflows in ip6_datagram_send_ctl() Yiming Qian reported : <quote> I believe I found a locally triggerable kernel bug in the IPv6 sendmsg ancillary-data path that can panic the kernel via `skb_under_panic()` (local DoS). The core issue is a mismatch between: - a 16-bit length accumulator (`struct ipv6_txoptions::opt_flen`, type `__u16`) and - a pointer to the *last* provided destination-options header (`opt->dst1opt`) when multiple `IPV6_DSTOPTS` control messages (cmsgs) are provided. - `include/net/ipv6.h`: - `struct ipv6_txoptions::opt_flen` is `__u16` (wrap possible). (lines 291-307, especially 298) - `net/ipv6/datagram.c:ip6_datagram_send_ctl()`: - Accepts repeated `IPV6_DSTOPTS` and accumulates into `opt_flen` without rejecting duplicates. (lines 909-933) - `net/ipv6/ip6_output.c:__ip6_append_data()`: - Uses `opt->opt_flen + opt->opt_nflen` to compute header sizes/headroom decisions. (lines 1448-1466, especially 1463-1465) - `net/ipv6/ip6_output.c:__ip6_make_skb()`: - Calls `ipv6_push_frag_opts()` if `opt->opt_flen` is non-zero. (lines 1930-1934) - `net/ipv6/exthdrs.c:ipv6_push_frag_opts()` / `ipv6_push_exthdr()`: - Push size comes from `ipv6_optlen(opt->dst1opt)` (based on the pointed-to header). (lines 1179-1185 and 1206-1211) 1. `opt_flen` is a 16-bit accumulator: - `include/net/ipv6.h:298` defines `__u16 opt_flen; /* after fragment hdr */`. 2. `ip6_datagram_send_ctl()` accepts *repeated* `IPV6_DSTOPTS` cmsgs and increments `opt_flen` each time: - In `net/ipv6/datagram.c:909-933`, for `IPV6_DSTOPTS`: - It computes `len = ((hdr->hdrlen + 1) << 3);` - It checks `CAP_NET_RAW` using `ns_capable(net->user_ns, CAP_NET_RAW)`. (line 922) - Then it does: - `opt->opt_flen += len;` (line 927) - `opt->dst1opt = hdr;` (line 928) There is no duplicate rejection here (unlike the legacy `IPV6_2292DSTOPTS` path which rejects duplicates at `net/ipv6/datagram.c:901-904`). If enough large `IPV6_DSTOPTS` cmsgs are provided, `opt_flen` wraps while `dst1opt` still points to a large (2048-byte) destination-options header. In the attached PoC (`poc.c`): - 32 cmsgs with `hdrlen=255` => `len = (255+1)*8 = 2048` - 1 cmsg with `hdrlen=0` => `len = 8` - Total increment: `32*2048 + 8 = 65544`, so `(__u16)opt_flen == 8` - The last cmsg is 2048 bytes, so `dst1opt` points to a 2048-byte header. 3. The transmit path sizes headers using the wrapped `opt_flen`: - In `net/ipv6/ip6_output.c:1463-1465`: - `headersize = sizeof(struct ipv6hdr) + (opt ? opt->opt_flen + opt->opt_nflen : 0) + ...;` With wrapped `opt_flen`, `headersize`/headroom decisions underestimate what will be pushed later. 4. When building the final skb, the actual push length comes from `dst1opt` and is not limited by wrapped `opt_flen`: - In `net/ipv6/ip6_output.c:1930-1934`: - `if (opt->opt_flen) proto = ipv6_push_frag_opts(skb, opt, proto);` - In `net/ipv6/exthdrs.c:1206-1211`, `ipv6_push_frag_opts()` pushes `dst1opt` via `ipv6_push_exthdr()`. - In `net/ipv6/exthdrs.c:1179-1184`, `ipv6_push_exthdr()` does: - `skb_push(skb, ipv6_optlen(opt));` - `memcpy(h, opt, ipv6_optlen(opt));` With insufficient headroom, `skb_push()` underflows and triggers `skb_under_panic()` -> `BUG()`: - `net/core/skbuff.c:2669-2675` (`skb_push()` calls `skb_under_panic()`) - `net/core/skbuff.c:207-214` (`skb_panic()` ends in `BUG()`) - The `IPV6_DSTOPTS` cmsg path requires `CAP_NET_RAW` in the target netns user namespace (`ns_capable(net->user_ns, CAP_NET_RAW)`). - Root (or any task with `CAP_NET_RAW`) can trigger this without user namespaces. - An unprivileged `uid=1000` user can trigger this if unprivileged user namespaces are enabled and it can create a userns+netns to obtain namespaced `CAP_NET_RAW` (the attached PoC does this). - Local denial of service: kernel BUG/panic (system crash). - ---truncated---

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis
How this class of weakness works · CWE-617

Attacker-controllable input can reach an assertion that aborts the process when it fails, so a check meant for debugging becomes a denial-of-service in production. A single crafted request takes the service down. The fix is to handle unexpected input gracefully on reachable paths rather than asserting on it.

General guidance for the reachable assertion class — the official description and references above are authoritative for this specific CVE. Want a bespoke review and a reviewed fix? Ask our team →

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Linux KernelOperating system
Affected:>= 2.6.14, < 5.10.253>= 5.11, < 5.15.203>= 5.16, < 6.1.168>= 6.2, < 6.6.134>= 6.7, < 6.12.81>= 6.13, < 6.18.22>= 6.19, < 6.19.12= 7.0

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Local
Complexity
Low
Privileges
Low
User interaction
None
Scope
Unchanged
Confidentiality
None
Integrity
None
Availability
High

CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

dbcve · scoped
Upgrade available Upgrade to 5.10.253 / 5.15.203 / 6.1.168 or later
Fixed in 5.10.2535.15.2036.1.168
Vendor patch git.kernel.org →
Recommended fix High confidence

Upgrade to kernel >= 5.10.253, 5.15.203, 6.1.168, or 6.6.134 depending on the branch in use (e.g., 6.6.134 for 6.2-6.6 branch, 6.1.168 for 5.16-6.1 branch)

  1. Identify the current running kernel version using `uname -r` or `cat /proc/version`
  2. Check if the current kernel version is among the affected versions: >= 2.6.14, < 5.10.253; >= 5.11, < 5.15.203; >= 5.16, < 6.1.168; >= 6.2, < 6.6.134
  3. Upgrade the kernel to a fixed version. For the 5.10.x branch: upgrade to >= 5.10.253. For the 5.11-5.15 branch: upgrade to >= 5.15.203. For the 5.16-6.1 branch: upgrade to >= 6.1.168. For the 6.2-6.6 branch: upgrade to >= 6.6.134
  4. After kernel upgrade, reboot the system into the new kernel
  5. Verify the fix is applied by checking the kernel version and reviewing the commit at git.kernel.org/stable/c/0bdaf54d3aaddfe8df29371260fa8d4939b4fd6f
Caveat Kernel upgrades may require system reboot and could introduce compatibility issues with out-of-tree kernel modules or specific hardware drivers; ensure backups and test in non-production environment first

Generated from the published advisory — verify against the referenced sources before acting.

We can perform the upgrade in your staging environment and verify nothing breaks — typical engagement from $1,600. Get the upgrade done

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2026-31415 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

Get it on GitHub Scan in the browser

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2026-31415 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data