Dir 895l FirmwareOperating system · Dlink

CVE-2023-36091

CRITICAL · 9.8 CVSS v3.1 Published 2023-07-31
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
100/100
Remediation priority · Urgent
Remotely reachable No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Authentication Bypass vulnerability in D-Link DIR-895 FW102b07 allows remote attackers to gain escalated privileges via via function phpcgi_main in cgibin. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

D-Link DIR-895L routers running firmware FW102b07 contain an authentication bypass vulnerability in the phpcgi_main function within the cgibin binary. Remote attackers can exploit this to bypass authentication mechanisms and gain escalated privileges without legitimate credentials.

MitigationSince D-Link no longer supports this product and provides no patches, the primary mitigation is to replace end-of-life hardware with a currently supported device. If replacement is not immediately feasible, network segmentation and restricting external access to the device may reduce exposure.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Dir 895l FirmwareOperating system
Affected:= 1.02

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
None
User interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
High

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify device model
    Access the router web interface or check the physical device label to confirm the model is D-Link DIR-895L
    Affected if Device is not a D-Link DIR-895L router, then not affected
  2. Check firmware version
    Log into the router web interface, navigate to Status or System Info section, and record the firmware version displayed
    Affected if Firmware version is 1.02 (FW102b07)
  3. Verify remote management access
    Check router settings under Advanced or Security settings for Remote Management or Web GUI access from WAN - confirm if it is enabled
    Affected if Remote management access from WAN is enabled and the device is internet-facing
  4. Test cgibin accessibility
    Attempt to access http://[router-ip]/cgibin/phpcgi_main.cgi from an external network to see if the endpoint responds without authentication
    Affected if The phpcgi_main endpoint is reachable from outside the local network without login credentials

User is affected if they have a D-Link DIR-895L router running firmware version 1.02 with remote management or the cgibin interface exposed to untrusted networks

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Since D-Link no longer supports this product and provides no patches, the primary mitigation is to replace end-of-life hardware with a currently supported device. If replacement is not immediately feasible, network segmentation and restricting external access to the device may reduce exposure.

Fix this in Dir 895l Firmware Scoped from the published advisory
  • Consultation2.0 h
  • Implementation4.0 h
  • Testing2.0 h
  • Review / QA1.0 h
9.0 hours of engineering $1,600
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $2,560.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2023-36091 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2023-36091 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data