dbcve.org
Rv042 FirmwareOperating system · Cisco

CVE-2024-20522

MEDIUM · 6.8 CVSS v3.1 Published 2024-10-02
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
74/100
Remediation priority · Elevated
Remotely reachable Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
A vulnerability in the web-based management interface of Cisco Small Business RV042, RV042G, RV320, and RV325 Routers could allow an authenticated, Administrator-level, remote attacker to cause an unexpected reload of an affected device, resulting in a denial of service (DoS) condition. To exploit this vulnerability, an attacker would need to have valid Administrator credentials on the affected device.   This vulnerability is due to improper validation of user input that is in incoming HTTP packets. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface of the affected device. A successful exploit could allow the attacker to cause an unexpected reload of the device, resulting in a DoS condition.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · high confidence

Improper validation of user input in incoming HTTP packets in the web-based management interface of Cisco Small Business RV042, RV042G, RV320, and RV325 Routers allows an authenticated Administrator-level attacker to send crafted HTTP requests causing an unexpected device reload, resulting in denial of service.

MitigationApply Cisco's firmware patch when released; until then, restrict management interface access to trusted networks or IP addresses using access control lists, and monitor for signs of exploitation.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Rv042 FirmwareOperating system
Affected:= 1.0.1.17= 1.0.2.03= 1.1.0.09= 1.1.1.06= 1.1.1.19= 1.2.1.13= 1.2.1.14= 1.3.1.10= 1.3.1.12= 1.3.2.02= 1.3.12.6-tm= 1.3.12.19-tm
Rv042g FirmwareOperating system
Affected:= 1.0.1.17= 1.0.2.03= 1.1.0.09= 1.1.1.06= 1.1.1.19= 1.2.1.13= 1.2.1.14= 1.3.1.10= 1.3.1.12= 1.3.2.02= 1.3.12.6-tm= 1.3.12.19-tm
Rv320 FirmwareOperating system
Affected:= 1.0.1.17= 1.0.2.03= 1.1.0.09= 1.1.1.06= 1.1.1.19= 1.2.1.13= 1.2.1.14= 1.3.1.10= 1.3.1.12= 1.3.2.02= 1.3.12.6-tm= 1.3.12.19-tm
Rv325 FirmwareOperating system
Affected:= 1.0.1.17= 1.0.2.03= 1.1.0.09= 1.1.1.06= 1.1.1.19= 1.2.1.13= 1.2.1.14= 1.3.1.10= 1.3.1.12= 1.3.2.02= 1.3.12.6-tm= 1.3.12.19-tm

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
High
User interaction
None
Scope
Changed
Confidentiality
None
Integrity
None
Availability
High

CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:N/I:N/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify router model
    Access the router web interface or CLI and determine if the device is a Cisco RV042, RV042G, RV320, or RV325 router
    Affected if Device model is one of RV042, RV042G, RV320, or RV325
  2. Check firmware version
    In the router web UI, navigate to Status > System Summary or use CLI command 'show version' to retrieve the firmware version
    Affected if Firmware version matches any of: 1.0.1.17, 1.0.2.03, 1.1.0.09, 1.1.1.06, 1.1.1.19, 1.2.1.13, 1.2.1.14, 1.3.1.10, 1.3.1.12, 1.3.2.02, 1.3.12.6-tm, or 1.3.12.19-tm
  3. Verify web-based management is enabled
    In the router web UI, check under Administration > Management Interface or similar to confirm the web-based management interface is enabled
    Affected if Web-based management interface is enabled and accessible
  4. Check management interface exposure
    Review the router's access control settings to determine if the management interface is exposed to untrusted networks or the internet
    Affected if Management interface is reachable from untrusted networks or IP addresses without proper ACL restrictions

You are affected if you are running any of the listed router models with a firmware version matching the affected versions AND the web-based management interface is enabled and accessible.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Apply Cisco's firmware patch when released; until then, restrict management interface access to trusted networks or IP addresses using access control lists, and monitor for signs of exploitation.

Fix this in Rv042 Firmware Scoped from the published advisory
  • Consultation2.0 h
  • Implementation1.0 h
  • Testing2.0 h
  • Review / QA1.0 h
6.0 hours of engineering $1,060
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $1,696.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2024-20522 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

Get it on GitHub Scan in the browser

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2024-20522 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data