dbcve.org
Dgs 1100 08pd FirmwareOperating system · Dlink

CVE-2026-11555

HIGH · 7.5 CVSS v3.1 Published 2026-06-08
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
81/100
Remediation priority · High
Remotely reachable Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
A vulnerability was identified in D-Link DGS-1100-08PD 1.00.006. This issue affects some unknown processing of the file /etc/boa.conf of the component Web Interface. Such manipulation leads to least privilege violation. The attack may be launched remotely. The attack requires a high level of complexity. The exploitability is assessed as difficult. The exploit is publicly available and might be used.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

A vulnerability in D-Link DGS-1100-08PD firmware 1.00.006 allows remote manipulation of the /etc/boa.conf configuration file through the web interface, leading to least privilege violation. The attack requires high complexity and no privileges, with publicly available exploit code.

MitigationRestrict network access to the device management interface; contact D-Link for firmware updates; if remote management is unnecessary, disable it.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Dgs 1100 08pd FirmwareOperating system
Affected:= 1.00.006

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
High
Privileges
Low
User interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
High

CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify the switch model
    Check the physical device label or access the management interface to confirm the model is D-Link DGS-1100-08PD
    Affected if The device is not a DGS-1100-08PD switch
  2. Check the installed firmware version
    Access the switch web interface or CLI and navigate to the firmware/version information section. The affected version is exactly 1.00.006
    Affected if The firmware version is 1.00.006
  3. Verify the web interface is enabled
    Access the switch management interface and check if the HTTP/HTTPS web interface is currently enabled in the system settings
    Affected if The web interface is enabled and the firmware is 1.00.006
  4. Inspect the boa.conf configuration file
    If you have SSH or console access, examine the /etc/boa.conf file for any unexpected modifications or misconfigurations in how the web server handles file processing
    Affected if The /etc/boa.conf file shows unusual configuration entries related to privilege settings

A user is affected if they are running firmware version 1.00.006 on a D-Link DGS-1100-08PD switch with the web interface enabled, as the vulnerability exploits the web interface's handling of the boa.conf configuration file.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

dbcve · scoped
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Restrict network access to the device management interface; contact D-Link for firmware updates; if remote management is unnecessary, disable it.

Recommended fix Moderate confidence

D-Link DGS-1100-08PD Firmware version 1.00.010

  1. 1. Download the latest firmware version 1.00.010 for D-Link DGS-1100-08PD from the official D-Link support website (support.dlink.com)
  2. 2. Access the device web interface or CLI using administrator credentials
  3. 3. Navigate to the firmware upgrade section (typically System > Firmware Upgrade or Maintenance > Upgrade)
  4. 4. Upload the downloaded firmware file (DGS-1100-08PD_v1.00.010.bin)
  5. 5. Wait for the upload to complete and the device to reboot automatically
  6. 6. Verify the firmware version has been updated to 1.00.010 after reboot
  7. 7. Confirm the /etc/boa.conf file now has correct permissions and privilege assignments
Caveat Firmware upgrades may reset device configuration to defaults; back up configuration before upgrading and restore after

Generated from the published advisory — verify against the referenced sources before acting.

Fix this in Dgs 1100 08pd Firmware Scoped from the published advisory
  • Consultation2.0 h
  • Implementation1.0 h
  • Testing2.0 h
  • Review / QA1.0 h
6.0 hours of engineering $1,060
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $1,696.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2026-11555 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

Get it on GitHub Scan in the browser

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2026-11555 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data