ArubaosOperating system · Arubanetworks

CVE-2026-23827

HIGH · 7.5 CVSS v3.1 Published 2026-05-12
Fix available
A fix is available. Upgrade to 8.10.0.22 / 8.12.0.7 or later.
See remediation →
84/100
Remediation priority · High
Remotely reachable No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
A heap-based buffer overflow vulnerability exists in a Network management service of AOS-8 and AOS-10 that could allow an unauthenticated remote attacker to achieve remote code execution. Successful exploitation could allow an unauthenticated attacker to execute arbitrary code as a privileged user on the underlying operating system, potentially leading to a system compromise. Exploitation may also result in a denial-of-service (DoS) condition affecting the impacted system process.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · high confidence

A heap-based buffer overflow vulnerability in the network management service of Aruba AOS-8 and AOS-10 allows unauthenticated remote attackers to achieve remote code execution as a privileged user. Successful exploitation grants the attacker arbitrary code execution capabilities on the underlying operating system, potentially leading to complete system compromise, with possible denial-of-service conditions affecting the service process.

MitigationApply vendor-released patches for AOS-8 and AOS-10 as soon as available. If patches are unavailable, consider network segmentation to restrict access to the management interface and implement additional monitoring for exploitation indicators.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
ArubaosOperating system
Affected:>= 6.5.4.0, < 8.10.0.22>= 8.11.0.0, < 8.12.0.7>= 8.13.0.0, < 8.13.1.2>= 10.4.0.0, < 10.4.1.11>= 10.5.0.0, < 10.7.2.3
Sd WanApplication
Affected:>= 8.6.0.4-2.2.0.0, <= 8.6.0.4-2.2.0.7>= 8.7.0.0-2.3.0.0, <= 8.7.0.0-2.3.0.9

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
None
User interaction
None
Scope
Unchanged
Confidentiality
None
Integrity
None
Availability
High

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify the Aruba product and version
    Run 'show version' on the device CLI or check the WebUI dashboard for the OS version information
    Affected if The displayed version falls within any of the affected ranges: AOS 6.5.4.0 to 8.10.0.21, 8.11.0.0 to 8.12.0.6, 8.13.0.0 to 8.13.1.1, 10.4.0.0 to 10.4.1.10, or 10.5.0.0 to 10.7.2.2; or for SD-WAN, versions 8.6.0.4-2.2.0.0 through 8.6.0.4-2.2.0.7 or 8.7.0.0-2.3.0.0 through 8.7.0.0-2.3.0.9
  2. Verify the network management service is enabled
    Check the device configuration for enabled management interfaces such as the WebUI (HTTPS/HTTP), REST API, or other management daemon services using 'show running-config' or 'show web-server configuration'
    Affected if Any network management service (WebUI, API, management daemon) is enabled and listening on accessible network interfaces
  3. Confirm management interface exposure
    Review interface bindings and access lists: check 'show ip interface', 'show management-interface', or firewall policies to determine if management services are bound to production or management networks rather than isolated VLANs
    Affected if The network management service is bound to interfaces accessible from untrusted networks or the management interface is exposed externally (e.g., WAN-facing or without VPN)

The environment is affected if the device runs a vulnerable AOS or SD-WAN version AND has the network management service enabled and accessible from the network where attackers can reach it.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

dbcve · scoped
Upgrade available Upgrade to 8.10.0.22 / 8.12.0.7 / 8.13.1.2 or later
Fixed in 8.10.0.228.12.0.78.13.1.2
Interim mitigation

Apply vendor-released patches for AOS-8 and AOS-10 as soon as available. If patches are unavailable, consider network segmentation to restrict access to the management interface and implement additional monitoring for exploitation indicators.

Recommended fix High confidence

ArubaOS: 8.10.0.22+ (8.10.x), 8.12.0.7+ (8.11.x), 8.13.1.2+ (8.13.x), 10.4.1.11+ (10.4.x); SD-WAN: version > 8.6.0.4-2.2.0.7 or > 8.7.0.0-2.3.0.9

  1. 1. Identify the currently installed ArubaOS or SD-WAN version by accessing the device CLI or web interface
  2. 2. Determine the appropriate upgrade path based on current version: for 8.10.x branch upgrade to >= 8.10.0.22; for 8.11.x branch upgrade to >= 8.12.0.7; for 8.13.x branch upgrade to >= 8.13.1.2; for 10.4.x branch upgrade to >= 10.4.1.11
  3. 3. Download the appropriate firmware from support.hpe.com (Aruba support portal)
  4. 4. Review release notes for the target version to ensure compatibility with your deployment
  5. 5. Create a backup of the current configuration
  6. 6. Upload the new firmware to the device using the CLI (upgrade-software) or WebUI
  7. 7. Reboot the device to apply the new firmware
  8. 8. Verify the device is running the patched version after reboot
Caveat Review release notes for any configuration or feature changes between current and target versions; some upgrades may require intermediate steps

Generated from the published advisory — verify against the referenced sources before acting.

Fix this in Arubaos Scoped from the published advisory
  • Consultation6.0 h
  • Implementation12.0 h
  • Testing10.0 h
  • Review / QA4.0 h
32.0 hours of engineering $5,580
Get the upgrade done

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $8,928.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2026-23827 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2026-23827 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data