dbcve.org
Tro610 FirmwareOperating system · Hitachienergy

CVE-2024-41153

HIGH · 7.2 CVSS v3.1 Published 2024-10-29
Fix available
A fix is available. Upgrade to 9.2.0.5 or later.
See remediation →
78/100
Remediation priority · High
Remotely reachable Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Command injection vulnerability in the Edge Computing UI for the TRO600 series radios that allows for the execution of arbitrary system commands. If exploited, an attacker with write access to the web UI can execute commands on the device with root privileges, far more extensive than what the write privilege intends.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · high confidence

Command injection vulnerability in the Edge Computing UI for Tait TRO600 series radios allows an attacker with web UI write access to inject and execute arbitrary system commands with root privileges, exceeding the intended scope of the write permission.

MitigationApply vendor firmware updates for TRO600 series when available; until then, restrict web UI access to trusted administrators only and monitor for suspicious input patterns in the Edge Computing UI.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Tro610 FirmwareOperating system
Affected:>= 9.1.0.0, < 9.2.0.5
Tro620 FirmwareOperating system
Affected:>= 9.1.0.0, < 9.2.0.5
Tro670 FirmwareOperating system
Affected:>= 9.1.0.0, < 9.2.0.5

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
High
User interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
High

CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify device model
    Determine if the device is a Tait TRO600 series radio, specifically the Tro610, Tro620, or Tro670 model. Check the device label, web UI system information page, or SNMP sysDescr for the exact model number.
    Affected if Device model is not one of Tro610, Tro620, or Tro670, then it is not affected by this specific CVE.
  2. Check firmware version
    Locate the firmware version in the device web UI (typically under System, About, or Status pages) or via CLI command if available. Compare the installed version against the affected range: >= 9.1.0.0 and < 9.2.0.5.
    Affected if Firmware version is 9.1.0.0 through 9.2.0.4 (inclusive), then the device is within the affected version range.
  3. Verify Edge Computing UI accessibility
    Check if the Edge Computing UI feature is accessible on the device. This is typically found in the web UI under a menu option for Edge Computing, Edge Applications, or similar. Confirm the UI module loads and accepts input.
    Affected if The Edge Computing UI is present and accessible, indicating the vulnerable component is enabled.
  4. Confirm web UI write access exposure
    Determine if the device web UI is exposed and assess whether write access is available. Check if administrative or write-level credentials can be used to access the Edge Computing UI configuration functions.
    Affected if Web UI with write permissions to Edge Computing UI is exposed to untrusted users, the command injection can be exploited.

A user is affected if they have a Tro610, Tro620, or Tro670 device running firmware version 9.1.0.0 through 9.2.0.4 with the Edge Computing UI accessible via web interface.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

dbcve · scoped
Upgrade available Upgrade to 9.2.0.5 or later
Fixed in 9.2.0.5
Interim mitigation

Apply vendor firmware updates for TRO600 series when available; until then, restrict web UI access to trusted administrators only and monitor for suspicious input patterns in the Edge Computing UI.

Recommended fix High confidence

Firmware version 9.2.0.5 or later for TRO600 series (Tro610, Tro620, Tro670)

  1. 1. Identify the specific TRO600 model (Tro610, Tro620, or Tro670) in your deployment
  2. 2. Backup the current device configuration following standard backup procedures
  3. 3. Obtain firmware version 9.2.0.5 or later from Hitachi Energy's official support portal (publisher.hitachienergy.com)
  4. 4. Access the device management interface and navigate to the firmware update section
  5. 5. Upload and apply the firmware version 9.2.0.5 or later to the device
  6. 6. Confirm the firmware upgrade completes successfully
  7. 7. Verify the device is operational and the Edge Computing UI is accessible
  8. 8. Validate that the command injection vulnerability is remediated by testing UI functionality
Caveat Review Hitachi Energy release notes for any configuration or feature changes between 9.1.x and 9.2.x firmware versions before upgrading

Generated from the published advisory — verify against the referenced sources before acting.

Fix this in Tro610 Firmware Scoped from the published advisory
  • Consultation6.0 h
  • Implementation12.0 h
  • Testing8.0 h
  • Review / QA4.0 h
30.0 hours of engineering $5,280
Get the upgrade done

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $8,448.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2024-41153 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

Get it on GitHub Scan in the browser

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2024-41153 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data